Speed ​​transmission from speed limit detection by vehicle camera *) When the vehicle detects a speed limit sign, the speed recorded in the LED ring of the speedometer is adjusted according to the configurable profiles. Two profiles are available for speed transmission, which can be freely configured. The tolerance speed can be set to ± 5 km/h or from 60 km/h in steps of ± 10 km/h Overtaking function. For example, if an incorrect speed limit is detected, the last recognized speed limit can be adopted by briefly pressing the accelerator pedal. Activation of the high beam assistant *2) The FLA is automatically activated after an ignition change Configuration is carried out using the smartphone app "KUFATEC Link" KUFATEC Link is available free of charge on Google Play and the Apple App Store The following functions are available in "KUFATEC Link" Edit profiles 1 and 2 Configure profiles General diagnostics with CAN packet counter Pin protection Incognito mode (the module is completely invisible after the set time) Software updates Over The Air Factory settings Display of the following information Traffic sign recognized Engine speed Accelerator pedal position Actual vehicle speed Scope of delivery: Module Plug & Play cable Note: *) Only for vehicles with PR code QR9 and 8T4 Can only be used on Audi A6/A7/S6/S7/RS6/RS7 4G, A8,S8 4H *2) Can only be used on vehicles with High Beam Assistant - PR code 8N2,8N7,8G1,8G4 Use of the system does not relieve the driver of his responsibility to drive the vehicle safely and in accordance with the law. Speed ​​and safety distance must always be controlled by the driver. The driver must always be prepared to brake. All functions described are subject to system limitations and require constant supervision by the driver.